BJFMQ - 26A BLACK, E770-B75

Product Identification

Product ID:26A BLACK, E770-B75
MSDS Date:08/16/1990
FSC:5820
NIIN:00-135-0639
Kit Part:Y
MSDS Number: BJFMQ

Responsible Party
SANDSTROM PRODUCTS COMPANY
224 SOUTH MAIN STREET
PORT BYRON, IL 61275-9501
US

Emergency Phone: 800-424-9300

Info Phone: 309-523-2121

Cage: 34227

Contractor
SANDSTROM PRODUCTS COMPANY
PORT BYRON, IL 61275 US

Telephone: 309-523-2121

Cage: 34227

Ingredients

PROPYLENE GLYCOL MONOMETHYL ETHER

CAS: 107-98-2

RTECS: UB7700000

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192


METHYLENE CHLORIDE (SARA III)

CAS: 75-09-2

RTECS: PA8050000

OSHA PEL 500 PPM/C,1000; Z2

ACGIH TLV: 50 PPM, A2; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ETHYL ALCOHOL (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192


METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


MOLYBDENUM DISULFIDE

CAS: 1317-33-5

OSHA PEL 10 MG/M3

ACGIH TLV: 10 MG/M3


ANTIMONY TRIOXIDE (SARA III)

CAS: 1309-64-4

RTECS: CC5650000

OSHA PEL 0.5 MG/M3 (SB)

ACGIH TLV: 0.5 MG SB/M3; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


BISPHENOL "A" EPOXY RESIN

CAS: 25036-25-3


1,4-DIOXANE (DIETHYLENE DIOXIDE) (SARA III)

CAS: 123-91-1

RTECS: JG8225000

OSHA PEL S, 100 PPM

ACGIH TLV: S, 25 PPM; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192


HLTH HAZ CON'T.(INGRED1,2,3,&4)(SKIN)MAY CAUSE DEFAT &

RTECS: 9999999ZZ


BASED ON INGRED 1,2,3,&8 EXP TO HIGH CONC OF VAP MAY PROD

RTECS: 9999999ZZ


PROD CARD ARRYTH.INGEST BASED ON INGRED 4,6,&8,MOD

RTECS: 9999999ZZ


AMTS OF LIQ ASPIRATED IN LUNGS DURING INGEST OR VOM MAY

RTECS: 9999999ZZ


CNS DEPRESS. BASED ON INGRED 1 & 3, PROD MAY BE IRRIT TO GI

RTECS: 9999999ZZ


THERMAL DECOMP PROD MAY

RTECS: 9999999ZZ


RADIATION MAY CAUSE THE FORMATION

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYE:BASED ON INGRED 2,3,&8 PROD
PRESUMED IRRIT,EXP MAY CAUSE CORNEAL INJURY.BASED ON INGRED 1,2,&4
PROD VAPS IRRIT.SKIN:BASED ON INGRED 3,4,& 8 PROD IRRIT,PRLNGED
CONT MAY CAUSE DMG.BASED ON INGRED 1& 8 ABSORB THROUGH SKIN MAY
RESLT IN SYMPOF EXP FOR INHAL & INGEST.BASED ON INGRED 1,2,3&4
PRLNGED/RPTD CONTC(SEE INGRED)
Explanation of Carcinogenicity:IARC CAR ASSESS: 1.4 DIOXANE -POSITIVE.
NTP CAR ASSESS: METHYLENE CHLORIDE -POSITIVE MOUSE, RAT.
Effects of Overexposure:EYE, SKIN, RESPIR, AND GI IRRIT AS NOTED IN
HEALTH HAZARD. BASED ON INGRED 1,2,3,4 & 8 CNS SYSTEM DEPRESSION
MAY BE EVIDENCED BY HEADACHE, DIZZINESS, NAUSEA & SYMPTOMS OF
INTOXICATION. IN EXTREME CASE S, UNCONSCIOUSNESS AND DEATH MAY
OCCUR.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN, EYE AND
RESPIRATORY DISORDERS & CENTRAL NERVOUS SYSTEM FUNCTIONS FROM
PREEXISTING DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS
PRODUCT.

First Aid

First Aid:EYES: IMMED FLUSH W/ LG AMTS WATER 15+ MIN HOLD LIDS OPEN,
GET MD ATTN. SKIN: REMOVE CONTAM CLTHG & SHOES FLUSH W/ SOAP &
WATER. DECONTAM CLTHG PRIOR TO REUSE. INHAL: REMOVE TO FRESH AIR.
TREAT SYMP. GIVE O*2 IF DFCLT, ARTF RESP IF NOT BRTHG. GET MD.
INGEST DON'T INDUCE VOMIT. IF IT OCCURS SPONT KEEP VICTIMS HEAD
BELOW HIPS TO PVNT ASPIR. GET MD, POISON CONTROL CENTER, OR TAKE TO
EMER FACILITY

Fire Fighting

Flash Point Method:PMCC
Flash Point:28.0F,-2.2C
Lower Limits:SEE INGRED
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL, OR CARBON
DIOXIDE.
Fire Fighting Procedures:WARNING, FLAM.CLEAR FIRE AREA OF UNPROT PERS
DO NOT ENTER CONFINED FIRE SPACE W/O HELMET,FSHILD,BUNKER
COAT,GLOVES,RUBBER BOOTS & POS PRESS SCBA.(SEE SUPP DATA)
Unusual Fire/Explosion Hazard:COOL CNTNR W/ WATER TO PVNT VAP PRESS
BUILDUP. CONTR AREA EXP TO DIRECT FLAME SHOULD BE COOLED WITH LGE
QTY OF WATER TO PVNT CONTR WEAKENING. (SEE INGRED #15)

Accidental Release

Spill Release Procedures:EVAC AREA. WEAR APPROP RESP & PROC CLTHG. SHUT
OFF LEAK SOURCE IF SAFE. DIKE & CONTAIN. IF VAPOR CLOUD, WATER FOG
TO SUPRESS; CONTAIN. REMOVE W/ VACUM TRUCK OR PUMP TO
STORAGE/SALVAGE VESSEL. USE ASOR B ON RESIDUE & DISPOSE OF
PROPERLY.FLUSH W/ WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP LIQUID & VAPOR AWAY FROM HEAT,
SPARKS, & OPEN FLAME. KEEP CONTRS CLOSED WHEN NOT IN USE.
Other Precautions:KEEP LIQ&VAP FROM HEAT,SPARKS,FLAME.EXTING PILOT
LTS,CIGS&OTHER IGNIT SOURCES PRIOR TO USE OR VAP GONE.KEEP CONTNRS
CLOSED WHEN NOT IN USE.EMPTY CONTR CAN HOLD EXP VAP,DO NOT
CUT,DRILL,GRIND/WELD NEAR THEM.HEAT AND/OR UV (SEE INGRED #16).

Exposure Controls

Respiratory Protection:AVOID PROLONGED OR REPEATED BREATHING OF
VAPOR/DUST. IF EXPOSURE EXCEEDS TLV, USE A NIOSH APPROVED RESIRATOR
TO PREVENT OVEREXPOSURE.
Ventilation:USE VENTILATION AS REQUIRED TO CONTROL VAPOR/DUST
CONCENTRATIONS.
Protective Gloves:USE IMPERVIOUS GLOVES
Eye Protection:CHEMICAL WORKERS GOGGLES.
Other Protective Equipment:EYE WASH FOUNTAINS AND SAFTY SHOWERS.
Work Hygienic Practices:WASH WITH SOAP AND WATER PRIOR TO EATING,
DRINKING, SMOKING OR USING THE TOILET FACILITIES.
Supplemental Safety and Health
REPORTS HAVE ASSOC RPTD AND PRLNGD OCCUPATIONAL OVEREXP TO SOLVENTS
WITH PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE
BY DELIBERATELY CONCENTRATING AND INHALING THE CONTENTS MAY BE HA
RMFUL OR FATAL.FIRE FIGHTING PROC(CON'T)WEAR NIOSH/MSHA APPROVED
PRESSURE DEMAND SCBA AND FULL PROCTECTIVE EQUIP .

Chemical Properties

Vapor Pres:SEE INGRED
Vapor Density:>1
Spec Gravity:1.20 +/-.2
Evaporation Rate & Reference:<1 (ETHER=1)
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:85.92

Stability

Stability Indicator/Materials to Avoid:YES
AVOID OXIDIZERS, STRONG ACIDS, AMINES, ALKANOLAMINES, SODIUM,
POTASSIUM, MAGNESIUM AND ALDEHYDES.
Stability Condition to Avoid:AVOID HANDLING IN ALUMINUM EQUIPMENT AT
TEMPS OVER 120F. AVOID GROSS WATER CONTAMINATION.
Hazardous Decomposition Products:CHLORINE GAS,HCL,CHLORIN ORGANIC
CMPDS,CO*2,CO,AND UNIDENT ORGANIC CMPDS MAY BE FORMED DURING
COMBUST. PHOSGENE

Disposal

Waste Disposal Methods:REFER TO LATEST EPA OR STATE REGULATIONS
REGARDING PROPER DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.